Torqeedo  |  SKU: 1244-20

Cruise 10.0 TL (Tiller sterring & Long shaft)


$12,927.00 USD
Tax included


Delivery and Shipping

Delivery from our own warehouse to Denmark takes approximately 1-3 business days. For Scandinavia & Northern Europe, the delivery time is 5-7 business days, and for Southern Europe, it's 7-10 business days.

If we do not have the item in stock, we will ship it directly from the manufacturer to your address - whenever possible.

We will always contact you to keep you informed about the status of your order.

If the delivery time should become unreasonably long, we reserve the right to cancel your order. This allows you the opportunity to seek an alternative supplier.



Electric outboard for motorboats and sailboats up to 10 tons

Product description


  • Tiller-equipped version of the Cruise 10.0
  • 12 kW peak output, 10 kW continuous output – powerful propulsion comparable to a 20 HP combustion engine
  • Intelligent on-board computer and the full convenience of a Torqeedo electric drive system
  • Electric tilting device for ease of operation
  • Easy handling thanks to low-voltage level (48 Volt)
  • Very robust design – corrosion-protected, sea water-capable and completely waterproof (IP67)
  • Slimline construction - elegant and modern
  • Versions: short shaft S: 38.5cm shaft length, long shaft L: 51.2cm shaft length, extra long shaft XL: 63.9cm shaft length
  • Weight: 60.3 kg (S), 61.8 kg (L) , 63.0 kg (XL)
  • To operate the Cruise 10.0 with more than two Power 48-5000 batteries, please contact your Torqeedo dealer
  • Please note that the engine power is reduced to 6 kW when operating with only one Power 48-5000 battery
 

Ordering information


  • Item number: 1244-20  | EAN: 4260113696200
  • Equipment included: Motor with tiller control and integrated on-board computer with display, emergency stop magnetic chip, connection cable set for two Power 48-5000 batteries (total length approx. 4.5 m) incl. main switch and battery terminal screws, 5-pin data cable (5m), standard propeller v22/p10k and sacrificial anodes (Al)
  • The TorqLink Gateway Set (2217-00) is required for operation, this is not included in the scope of delivery
  • Warranty: 2 years for non-commercial use
 

    Cruise motors are the electric outboard motor of choice for motorboats, dinghies and commercial users. All Cruise systems have a built-in GPS with onboard computer and display with speed and input power, state of charge and remaining range, with a compact, low-drag, and lightweight pylon due to advanced helical gear design. Cruise 10.0 T is a tiller-equipped 48-Volt, 20 horsepower-equivalent outboard perfect for boats up to 10 tons.


    Cruise 10.0 T - Benefits:

    • High-efficiency outboard with 10,000 W input power, equivalent to the thrust of a 20 HP petrol outboard
    • Pair with two Power 48-5000 for maximum performance and accurate range/runtime functionality
    • Also compatible with third-party batteries (48-Volt) but careful matching to motor power requirements is needed and addition of cable set part number 1979-00 is required: Power 48-5000 is strongly recommended for best motor performance
    • T models are equipped with tiller control with display screen and magnetic kill switch (included in scope of delivery)
    • Rugged pylon with integral fin – extra protection when running aground
    • Highest-grade seawater-proof aluminum for long service life, even in the harshest conditions
    • Comprehensive galvanic corrosion protection through careful matching of all materials and meticulous isolation of materials with different electrochemical properties - ships with anode set for fresh and saltwater

         

        Technical Data Cruise 10.0 T

         

         

        Cruise 10.0 T
        Input power in watts 10,000
        Propulsive power in watts 5,600
        Comparable petrol outboards (propulsive power) 20 HP
        Comparable petrol outboards (thrust) 25 HP
        Maximum overall efficiency in % 56
        Static thrust in lbs* ≤ 405
        Integrated battery -
        Nominal voltage 48
        Final charging voltage -
        Total weight in kg 60.3 (S) / 61.8 (L) / 63.0 (XL)
        Motor weight without battery in kg -
        Weight of integrated battery -
        Shaft length in cm 38.5 (S) / 51.2 (L) / 63.9 (XL)
        Standard propeller
        v = speed in km/h at p = power in watts
        v22/p10k
        Alternative propeller options v32/p10k & v15/p10k
        Propeller Guide
        Maximum propeller speed in rpm 1,400
        Control Remote throttle
        Steering Provision to connect to standard remote steering
        Tilting device Electrohydraulic tilt device with overload protection.
        Tilt angle +-45°
        Trim device Manual, 4-step
        Integrated on-board computer Yes
        Stepless forward/reverse drive Yes
        * Torqeedo static thrust measurement is based on internationally accepted ISO standards. Static thrust figures for conventional trolling motors are typically measured differently, which results in higher values. To compare Torqeedo static thrust data with conventional trolling motors, add approximately 50% to the Torqeedo static thrust values.
        Torqeedo

        Cruise 10.0 TL (Tiller sterring & Long shaft)

        $12,927.00 USD

        Electric outboard for motorboats and sailboats up to 10 tons

        Product description


        • Tiller-equipped version of the Cruise 10.0
        • 12 kW peak output, 10 kW continuous output – powerful propulsion comparable to a 20 HP combustion engine
        • Intelligent on-board computer and the full convenience of a Torqeedo electric drive system
        • Electric tilting device for ease of operation
        • Easy handling thanks to low-voltage level (48 Volt)
        • Very robust design – corrosion-protected, sea water-capable and completely waterproof (IP67)
        • Slimline construction - elegant and modern
        • Versions: short shaft S: 38.5cm shaft length, long shaft L: 51.2cm shaft length, extra long shaft XL: 63.9cm shaft length
        • Weight: 60.3 kg (S), 61.8 kg (L) , 63.0 kg (XL)
        • To operate the Cruise 10.0 with more than two Power 48-5000 batteries, please contact your Torqeedo dealer
        • Please note that the engine power is reduced to 6 kW when operating with only one Power 48-5000 battery
         

        Ordering information


        • Item number: 1244-20  | EAN: 4260113696200
        • Equipment included: Motor with tiller control and integrated on-board computer with display, emergency stop magnetic chip, connection cable set for two Power 48-5000 batteries (total length approx. 4.5 m) incl. main switch and battery terminal screws, 5-pin data cable (5m), standard propeller v22/p10k and sacrificial anodes (Al)
        • The TorqLink Gateway Set (2217-00) is required for operation, this is not included in the scope of delivery
        • Warranty: 2 years for non-commercial use
         

          Cruise motors are the electric outboard motor of choice for motorboats, dinghies and commercial users. All Cruise systems have a built-in GPS with onboard computer and display with speed and input power, state of charge and remaining range, with a compact, low-drag, and lightweight pylon due to advanced helical gear design. Cruise 10.0 T is a tiller-equipped 48-Volt, 20 horsepower-equivalent outboard perfect for boats up to 10 tons.


          Cruise 10.0 T - Benefits:

          • High-efficiency outboard with 10,000 W input power, equivalent to the thrust of a 20 HP petrol outboard
          • Pair with two Power 48-5000 for maximum performance and accurate range/runtime functionality
          • Also compatible with third-party batteries (48-Volt) but careful matching to motor power requirements is needed and addition of cable set part number 1979-00 is required: Power 48-5000 is strongly recommended for best motor performance
          • T models are equipped with tiller control with display screen and magnetic kill switch (included in scope of delivery)
          • Rugged pylon with integral fin – extra protection when running aground
          • Highest-grade seawater-proof aluminum for long service life, even in the harshest conditions
          • Comprehensive galvanic corrosion protection through careful matching of all materials and meticulous isolation of materials with different electrochemical properties - ships with anode set for fresh and saltwater

               

              Technical Data Cruise 10.0 T

               

               

              Cruise 10.0 T
              Input power in watts 10,000
              Propulsive power in watts 5,600
              Comparable petrol outboards (propulsive power) 20 HP
              Comparable petrol outboards (thrust) 25 HP
              Maximum overall efficiency in % 56
              Static thrust in lbs* ≤ 405
              Integrated battery -
              Nominal voltage 48
              Final charging voltage -
              Total weight in kg 60.3 (S) / 61.8 (L) / 63.0 (XL)
              Motor weight without battery in kg -
              Weight of integrated battery -
              Shaft length in cm 38.5 (S) / 51.2 (L) / 63.9 (XL)
              Standard propeller
              v = speed in km/h at p = power in watts
              v22/p10k
              Alternative propeller options v32/p10k & v15/p10k
              Propeller Guide
              Maximum propeller speed in rpm 1,400
              Control Remote throttle
              Steering Provision to connect to standard remote steering
              Tilting device Electrohydraulic tilt device with overload protection.
              Tilt angle +-45°
              Trim device Manual, 4-step
              Integrated on-board computer Yes
              Stepless forward/reverse drive Yes
              * Torqeedo static thrust measurement is based on internationally accepted ISO standards. Static thrust figures for conventional trolling motors are typically measured differently, which results in higher values. To compare Torqeedo static thrust data with conventional trolling motors, add approximately 50% to the Torqeedo static thrust values.
              View product